Bosch wf2001 problem

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Bosch wf2001 problem

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 23, 2013 at 2:11 pm #75153
    benjak
    Participant

    Hi
    The washing machine is on the blink!!!

    Power getting to everything but when I select a programme it fails to get pass the washing cycle.
    All three water valves are working OK.
    Power is getting to the water heater terminals and I can hear the immersion heater heating the water.
    The water level vacuum switch seems to be working as well.
    If I fill the machine up with hot water from an external source the machine does go through its cycle.
    There seems to be what I asume is a temperature sensor on the heater. Could this be the problem or is it just the Immersion heater itself.
    Regretably my test meter is broken and I am relying upon a test lamp – not very satisfactory!!

    Any help would be appreciated.
    Regards

    April 23, 2013 at 2:32 pm #394115
    Specialist01269
    Participant

    Re: Bosch wf2001 problem

    Hi: You should’nt be working on the appliance while live.
    You say that the machine will fill & run, but nothing about it emptying out. If the machine does’nt empty due to a blockage, faulty pump or pump not being energised then it won’t go into spin.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.