Whirlpool 7470/1 Built in Dishwasher 6 Flashes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool 7470/1 Built in Dishwasher 6 Flashes

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 25, 2013 at 11:01 am #75188
    ray.t
    Participant

    Hi,
    Been back to this machine today to fit a new flow meter as it was flashing 6 times. From looking in the manual it states 6 flashes as tap closed, water pressure too low or hose kinked.
    The machine will start and fill fine, it stops filling and opens the dispenser and then pauses for about 30 seconds and then drains.
    It then flashes the error code (6 flashes)
    Fitting the new flow meter made no difference its still doing the same
    Cheers,
    Ray

    April 25, 2013 at 1:52 pm #394176
    Muv
    Participant

    Re: Whirlpool 7470/1 Built in Dishwasher 6 Flashes

    Have had this problem a while back,turned out to be low insulation on the heater!

    Martin

    April 25, 2013 at 5:30 pm #394177
    ray.t
    Participant

    Re: Whirlpool 7470/1 Built in Dishwasher 6 Flashes

    Thanks Martin, I will check it out
    Cheers,
    Ray

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.