wf000p

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wf000p

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 29, 2013 at 7:27 pm #75248
    clockworkone
    Participant

    got this one with lights 1 + 3 flashing.pressure switch fault.checked pr hose and chamber,all clear.replaced pr sw but still throws up same fault.any ideas.paul

    April 29, 2013 at 8:02 pm #394329
    iadom
    Moderator

    Re: wf000p

    F10 = Pressure switch not sensing: check switch &
    module connections

    April 30, 2013 at 4:30 pm #394330
    clockworkone
    Participant

    Re: wf000p

    Thank you for reply.replaced pr sw and checked module connections.fault still remains.checked tube.did reset procedure on pr sw. m/c in shed with seperate fridge and freezer.all being fed by ext lead and variety of multiplug adapters.Hot plugs allround.advised that this was a fire hazard and that they needed a mini consumer unit wired into shed.

    April 30, 2013 at 6:16 pm #394331
    iadom
    Moderator

    Re: wf000p

    Can be a pcb fault if all else checks out. 😥

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.