- This topic has 2 replies, 2 voices, and was last updated 12 years, 12 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
I’m having problem with above machine.
The machine starts and fills with water but drum won’t turn.
I have replaced the brushes on the motor.
When I removed them one of the old brushes did have some evidence of charring on the end of the brush holder.
I fitted the new brushes, and started machine, and still don’t turn.
I can hear a clicking noise coming from the top right of machine.
What could be by next step to take?Re: Hoover hnl6166
Moved to correct forum.
You need to test the motor with a suitable multimeter or megger, then check the wiring between the motor and the pcb. After that you will have to remove the pcb and inspect for any signs of damage.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.