Indesit DI 620 heater fault.

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Indesit DI 620 heater fault.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 4, 2013 at 10:45 am #75308
    Soapy
    Participant

    Our machine s/n 606065105 I believe, sizzled for a couple of days then tripped the RCD. The heater element is very pitted, so I assume this is faulty. What test can I do to prove it is faulty and is it a simple task to remove the old one please.

    Thank you

    Paul.

    May 4, 2013 at 11:32 am #394462
    iadom
    Moderator

    Re: Indesit DI 620 heater fault.

    Heater terminals can be accessed from the front at a pinch. If not you will have to drag it out and lie it on it’s left hand (from front) side and remove the base plate.

    You need to do an insulation test on the heating element with the wiring connections removed. Be sure to remove the mains plug first.

    May 4, 2013 at 4:55 pm #394463
    madangler1
    Participant

    Re: Indesit DI 620 heater fault.

    Yep as iadom says it can be done through the RH hole in the lower front.

    Very fiddley still far easier than dragging it out.

    May 4, 2013 at 6:37 pm #394464
    Soapy
    Participant

    Re: Indesit DI 620 heater fault.

    Thank you for the replies. Not a problem as the machine is already out with the bottom cover off.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.