- This topic has 5 replies, 4 voices, and was last updated 12 years, 11 months ago by
.
-
Posts
-
Please help, I have a Hoover OPH714D. It does everything except spin, despite error code 03. Did have error code 016 aswell but it seems to be ok now after cleaning the element sensor. Does any one have any idea what I need to do now?
Re: new
Hi: Have you emptied the filter ? if the filter is blocked then the machine either won’t pump out or won’t pump out fully & it won’t go into spin. Also if it has a spin inhibit button, make sure that it has’nt been accidentaly pressed.
Re: Hoover OPH714D
E016 is dispersion from the heater, on this model it can also bring up an e03 drain issue which isn’t actually the fault. Replace heater, check for lime scale build up also
Re: Hoover OPH714D
Hi: Although from past experience we might have a fair idea what’s causing a posters problem. We allways get them to go through the simple things first & especially where something Electrical is concerned we allways ask them to make tests first to confirm a problem & not just jump in with fitting what could be an expensive replacement part.
Re: Hoover OPH714D
Ok mate,I work for Hoover though and come across this problem a lot ,we had a memo through for the false e03 error when heater low insulation
Re: Hoover OPH714D
sorry about that.. im sure theres other jobs out there? I do hope your selling plenty of 5 yr covers/ care & protect… that’s WAY more important than having 18 tubs in your back garden or having to tell the customer 14 visits in 3 months is quite normal….
however ur bang on with the heater diagnosis
- You must be logged in to reply to this topic.