- This topic has 6 replies, 4 voices, and was last updated 12 years, 11 months ago by
.
-
Posts
-
I have installed a beko D/W it has a condensation strip, I didn’t known it had one in the package until after I installed the appliance, the customer has noticed. Is it vital. ( i.e. am I obliged to fit this part) john
Re: Beko Dishwasher
the condensation strip is to prevent steam from damaging the kitchen work surface and all dishwasher use them. if the work surface is granite then its not necessary but if its wood it is. i would assume is my job to fit them if I install a dishwasher
if it was my job i would return and install it.Dave
Re: Beko Dishwasher
thanks for reply, but unless I read it wrong, this strip appeared to fit around the base of this machine !! Also there is a gap between machine and the work top of about half an inch.!! john
Re: Beko Dishwasher
just a quick question, I have never fitted a condensation before,as I have never seen them in the package, and I have fitted a few Bosch D/W and other brands !! so when its said they all have them, am I missing something.!! john
Re: Beko Dishwasher
I’ve never seen a BSH integrated come without one.
Sent from my iPad using Tapatalk HDRe: Beko Dishwasher
Beko have just started including these thick foam strips which the customer is expected to fit on all four sides of the base I’m not sure why though I thought possibly to reduce noise ??
- You must be logged in to reply to this topic.