Siemens WIQ1634GB/03

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens WIQ1634GB/03

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 15, 2013 at 12:44 pm #75435
    WhiteVanMan1
    Participant

    The machine switches on, and I can set the programme, but it will not start up. Pump checked. The door does not lock. Suspect interlock perhaps? Or supply from PCB? Any ideas please? Cheers. Steve.

    May 15, 2013 at 3:22 pm #394932
    timdowning
    Participant

    Re: Siemens WIQ1634GB/03

    Blimey thats a difficult one to call.

    You can only but run with a door lock and see?

    (Not sure if this machine looks for a circuit through valves, heater, motor etc before starting? I would still expect the door to lock first though?)

    May 15, 2013 at 6:35 pm #394933
    nomadPaul
    Participant

    Re: Siemens WIQ1634GB/03

    Before you fit a new lock , check all the wiring loom close to the lock itself. They have a habit of rubbing on the chassis and wearing through.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.