AEG 5040 1-W Int’ Dishwasher (911234126) Constant Draining

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG 5040 1-W Int’ Dishwasher (911234126) Constant Draining

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 28, 2013 at 5:36 pm #75619
    jontymox
    Participant

    Good evening all,

    Wondering if anyone can pffer any advice on the above fault?

    I’ve been to the above m/c three times now, and thought I’d cured the above problem.

    The drain pump activates constantly, and I ascertained that the leak causing the anti flood device to activate was from the matrix/air break which I renewed.

    However, two weeks on and the problem recurred.

    Upon further and closer inspection I’ve been unable to identify any further leak, and the anti flood device seems fine.

    There was no sign of a leak, and would welcome some advice.

    Best wishes,

    jonty

    May 28, 2013 at 7:01 pm #395655
    Martin
    Participant

    Re: AEG 5040 1-W Int’ Dishwasher (911234126) Constant Drain

    If the base is bone dry and yet the anti flood micro is operating could it not be that the microswitch may have corroded contacts?

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.