hoover AM110 no heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hoover AM110 no heat

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 5, 2013 at 9:46 pm #75735
    alro
    Participant

    Hi gents
    have a am110 core board type changed bearing now i have no 240v at heater need wiring diagramme as i did disconnect core board plugs only on bottom of board now it wont heat up but all programmes work cheers alro email ( arose.a@sky.com)

    June 6, 2013 at 4:52 pm #395982
    Martin
    Participant

    Re: hoover AM110 no heat

    Here you go…….

    June 6, 2013 at 10:25 pm #395983
    alro
    Participant

    Re: hoover AM110 no heat

    MARTIN have you got the wiring for core board am110 in a different way and not a scimatic type or what do the numbers on drawing define
    cheers alro

    June 8, 2013 at 6:31 pm #395984
    Martin
    Participant

    Re: hoover AM110 no heat

    alro wrote:and not a scimatic type or what do the numbers on drawing define

    There are only 3 connector blocks on the coreboard. Marked A, B & C. For example, all on block A go to the motor (A7 and A8 to the tacho). OK?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.