Indesit WD10 filling problem

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit WD10 filling problem

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 14, 2013 at 7:00 pm #75853
    Terrorford
    Participant

    My Indesit WD10 has been filling the drum with water even though the machine is powered off, seems to be a slow filling problem which causes it to reach the level of the door in ~2 days. I can empty it by selecting a spin cycle?

    Any ideas why this might be happening or if its a common problem?

    June 14, 2013 at 8:07 pm #396374
    Allsorts
    Participant

    Re: Indesit WD10 filling problem

    Check and change faulty fill valves

    June 15, 2013 at 5:24 pm #396375
    Terrorford
    Participant

    Re: Indesit WD10 filling problem

    Cheers, I have taken out both the hot and cold solenoids.

    What resistance should be on them…..I’ve no way of knowing whether the hot or cold one is bust!!

    June 15, 2013 at 6:40 pm #396376
    Martin
    Participant

    Re: Indesit WD10 filling problem

    Put them back on and take the outlet hose (to the dispenser & condenser) off. Turn on stopcock and see which one is letting water pass. Usually it is the condenser valve (cold) that is the problem as a rule.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.