WMA 64 1600 ULTIMA

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WMA 64 1600 ULTIMA

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 15, 2013 at 12:37 pm #75860
    DDSDDS
    Participant

    just looking at this machine in my workshop now
    washes fine spins fine but opnce the cycle is completed the door remains locked and the machine takes in water in short bursts till theres a few inches in the drum
    i have changed the top pcb twice
    i have changed the lower pcb
    i have checked the valves and even changed pressure switch
    can anyone save me spending the weekend changing every component one at a time till it works cos i got to be honest im scratching my head on this one

    June 15, 2013 at 3:08 pm #396417
    Allsorts
    Participant

    Re: WMA 64 1600 ULTIMA

    Try the door lock.. also look at the plug for the door lock to make sure it is not tracking

    June 16, 2013 at 2:47 pm #396418
    DDSDDS
    Participant

    Re: WMA 64 1600 ULTIMA

    thanks for your reply
    i came to the same conclusion mysely after much messing around and it was the door lock
    wish id seen your reply earlier would have saved me loads of messing lol
    thanks

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.