Indesit WD12x Interlock

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Indesit WD12x Interlock

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • June 17, 2013 at 6:52 pm #75890
    cornwell40
    Participant

    Interlock is a Bitron, looks identical(apart from plug 👿 ) to the c00085194.
    Serial is 705188146.80272330900

    Anyone know the correct part number.

    Cheers in advance

    Tony

    June 17, 2013 at 8:09 pm #396502
    iadom
    Moderator

    Re: Indesit WD12x Interlock

    C00085194 is listed as the correct part for that serial number.

    June 17, 2013 at 8:22 pm #396503
    cornwell40
    Participant

    Re: Indesit WD12x Interlock

    Hmmmm. Now I’m confused. The C00085194 I’ve got doesn’t fit and is a metalflex. The one off the machine is Bitron. Unless I’ve been bagged up wrong and that has been said before.

    June 17, 2013 at 8:24 pm #396504
    iadom
    Moderator

    Re: Indesit WD12x Interlock

    The door lock did change on these…….in 2001.

    All the C00085194’s that I have in stock are metaflex, direct replacement for the bitron if you turn the plug round on the WMA’s . :con:

    Sent from my iPad using Tapatalk HD

    June 18, 2013 at 8:20 am #396505
    cornwell40
    Participant

    Re: Indesit WD12x Interlock

    The loom to this is a longer plug with two locking tabs on similar to the Bosch motors.

    June 18, 2013 at 9:02 am #396506
    iadom
    Moderator

    Re: Indesit WD12x Interlock

    Perhaps someone with access to Servicenet ( not the cowboy operation ) may be able to help?

    June 18, 2013 at 3:10 pm #396507
    madangler1
    Participant

    Re: Indesit WD12x Interlock

    The 194 lock has recently changed( last two weeks) to a new version that’s black and has a push release on top I it. The PIN numbers have also changed from 3,4,5 to 4,5,6

    Wire as follows 3 to 4, 4 to 5 and 5 to 6.

    June 22, 2013 at 12:07 pm #396508
    cornwell40
    Participant

    Re: Indesit WD12x Interlock

    Been with a new 194 interlock just in case it was packed wrong but no luck. The original interlock is slightly longer than the 194 with a metal slide and a 4 way plug but only using 3 connectors in it. Will try and post a photie or two to see if anyone recognises it. The annoying thing is it works but he’s sh**ged up the slide trying to get the door open when he broke off the handle.

    June 22, 2013 at 12:21 pm #396509
    cornwell40
    Participant

    Re: Indesit WD12x Interlock

    http://www.ebay.co.uk/itm/Indesit-WI101 … 19daccdbd9


    This one 😀 . Looked at Wi101 and guess what 194 interlock shown 😥 . Looks like I might be going s/h if there aren’t any available. I’d swap the wires our of the plug if I thought I could trust Indesit not to have swapped wiring around on this one.

    June 24, 2013 at 9:03 pm #396510
    suedehead1
    Participant

    Re: Indesit WD12x Interlock

    a second hand door lock for £12 i am in the wrong .
    its definately the 194 door lock you need. the way i change them is if the wires are coming out of the plug towards the front of the machine i make sure they are pointing the same way on the new interlock.

    June 14, 2017 at 7:10 pm #396511
    folleyball
    Participant

    Re: Indesit WD12x Interlock

    Has anyone else had this problem?

    I have one to change tomorrow!

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.