Beko DRCS68W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko DRCS68W

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 19, 2013 at 10:39 am #75905
    pegasusk7
    Participant

    What am I missing here?

    Hubby fitted new belt on Beko DRCS68W Condenser Sensordry TD but missed that the drum was near seized, have replaced belt again and fitted front seal, all is well but there seems to be next to no heat when in use. Heater fine, ntc seems ok.

    Phil

    June 20, 2013 at 9:35 pm #396546
    suedehead1
    Participant

    Re: Beko DRCS68W

    possibly disconnected connector going to the heater.

    June 22, 2013 at 9:06 pm #396547
    keithwilliams
    Participant

    Re: Beko DRCS68W

    yes i agree. i do this for a living and i forgot to reconnect the heater when i put one of these back together.

    June 24, 2013 at 6:02 am #396548
    captaincaveman1
    Participant

    Re: Beko DRCS68W

    Its also possible on this model to reverse the connection the wrong way around which results in only half the element working.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.