roundy roundy hose clagging BOCH S210 from the 80s

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › roundy roundy hose clagging BOCH S210 from the 80s

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 19, 2013 at 2:45 pm #75912
    philday29
    Participant

    i have a bosch s210 dishwasher of from the 80s .penguin 45 previously diagnosed problems with the roundy roundy hose for somebody .i am almost certain i have the same problem,that is to say copious clagging .my question is how to disconnect the hoses,are they just pushed on ? i can see a join onto a round white plastic part and a T where the pipe appears blacker . i was reluctant to force them off without asking .

    June 19, 2013 at 2:53 pm #396583
    Martin
    Participant

    Re: roundy roundy hose clagging BOCH S210 from the 80s

    Apply a little heat from a hair dryer onto the clear PVC pipe makes it easier to work with and dismantle. Once the connector to the T piece is off then a good flush through with boiling (or near boiling from a kettle poured into to tub that is) hot water into a bowl, the crud comes out, for perfect results every time. 😀

    June 19, 2013 at 7:34 pm #396584
    philday29
    Participant

    Re: roundy roundy hose clagging BOCH S210 from the 80s

    thanks martin will try in the morning now

    June 21, 2013 at 6:44 am #396585
    philday29
    Participant

    Re: roundy roundy hose clagging BOCH S210 from the 80s

    heat worked ,washed out pipes and system in general and while some stuff came out it did not seem so much .but reassembled and tried the machine anyway and it works again .

    GREAT SITE THANKS AGAIN MARTIN

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.