cda cw496/1

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #75931
    senseib
    Participant

    This dishwasher stops and starts after filling. I thought it was the rubbish askell spray pump, but i have changed it for the modern type motor an it still does it. This type doesn’t have the pressure stat that gets clogged up so can’t be that – any ideas welcome!

    Brian

    #396654
    electrofix
    Moderator

    Re: cda cw496/1

    so lets get it straight in my brain

    you select a programme and it pumps then fills

    as its filling main motor starts and stops and starts and stops

    is this about right

    possible timer power supply capacitor not sure if this model has one but its worth swopping if it has one

    see

    trade-technical/simple-pcb-repair-tips-t51155.html

    for post made by myself and others

    Dave

    #396655
    senseib
    Participant

    Re: cda cw496/1

    Hi Electrofix,

    Thanks for your reply, where on the timer would the capacitor be ?

    #396656
    electrofix
    Moderator

    Re: cda cw496/1

    if you look at the pictures in the pcb faults section it will give you an idea but part will be on the main pcb normally in the door

    Dave

    #396657
    senseib
    Participant

    Re: cda cw496/1

    Hi Electrofix, thanks again for the info. Can you tell me the part number with the right polarity please and where to get it?

    #396658
    electrofix
    Moderator

    Re: cda cw496/1

    the capacitors are either 1uF or 1.5uF normally they are not polarised ( working on ac )

    if you find the value will tell you part no etc

    supplers are either rs components or Farnell

    Dave

    if you want to post a picture up of the board can point components out to you if its configered that way

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.