- This topic has 2 replies, 2 voices, and was last updated 12 years, 9 months ago by
.
-
Posts
-
My Bosch SGV57T03GB/08 is not finishing washes, and sticking on 1 minute remaining. Had this before with slight leak to the sump, but that is dry. Replaced the heater unit last year which I think came with new sensors. If I use the 70 degree pan wash, it finishes ok, but on the low temperature, 50 degree, or Auto settings, it sticks at 1 minute. It fills ok, heats ok etc. Pipes all clear, and cleaned with cleaner. I’m wondering if it’s the Turbidity Sensor, and if this is not activated on the high temp pan wash? I recall that this is about the first thing they put into the dishwasher when it is made and requires the tub removal to replace so would appreciate if folk think this is likely the problem, or something else.
Re: Bosch 1-Minute but not on 70c wash
Thanks, but I took a look at that prior to the original post, and checked most of the ideas out – so Turbidity looks a suspect, but less than a year old (fitted with the heater housing), so was wondering if the information that it’s fine on the 70c wash might narrow it down even more. I’ll go clean it manually tomorrow and if no sign of excessive gunge, will replace Turbidity.
- You must be logged in to reply to this topic.