WMD940 F01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WMD940 F01

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 26, 2013 at 10:58 am #76006
    allan73
    Participant

    Hi,
    I have been having problems with the above intermittently bringing up F01 after approx 15 mins into the programme.
    The main board has been sent to EMW twice,who are adamant the board is fine. The motor has been replaced with one from a scrap m/c on which the drum had failed and motor plug has been replaced, no earth leaks to be found.
    Can anyone offer any advice on how to proceed ?
    Allan

    June 27, 2013 at 9:11 am #396941
    allan73
    Participant

    Re: WMD940 F01

    Can anyone help ? I’m really scratching my head on this one.
    Allan

    June 30, 2013 at 7:55 pm #396942
    tj5793
    Participant

    Re: WMD940 F01

    Have you checked the door interlock wiring for burn marks any sign of heat

    June 30, 2013 at 10:16 pm #396943
    madangler1
    Participant

    Re: WMD940 F01

    Is that a 3 phase model ?

    July 1, 2013 at 6:18 am #396944
    johnnyj
    Participant

    Re: WMD940 F01

    There is 3 versions of this machine all with different modules and motors fitted my money would still be on the module

    July 19, 2013 at 6:19 pm #396945
    allan73
    Participant

    Re: WMD940 F01

    Yes was a 3 phase motor. I’ve scraped it now but still feel the module was at fault. I’m going to try the motor on another m/c tomorrow and see if it works ok.
    Allan.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.