ISE 1606 paddle removal.

Home › Forums › Manufacturer/WP/Insurer Specific Forums › ISE Trade Support Forum › ISE 1606 paddle removal.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 27, 2013 at 7:22 pm #76027
    aqualectric
    Participant

    I can’t bloody do it!!! 😳

    Followed the instruction book to the letter but they still won’t budge. Put the screwdriver though the centre hole in the paddle and twisted, pushed and pulled in all directions as the “twist the screwdriver” or ‘lean to the left’ as it should read – didn’t work.
    Usual thing though; “They come off really easily…..” then they don’t when the customer is watching.

    So help!! How’s it done?

    Steve.

    June 27, 2013 at 10:41 pm #396990
    admin
    Keymaster

    Re: ISE 1606 paddle removal.

    Tell the Customer to leave the house and kick it

    Bryan

    June 28, 2013 at 9:34 am #396991
    EFS
    Participant

    Re: ISE 1606 paddle removal.

    The effort on the screwdriver is minimal but you will be fighting against any build up of crud under the paddle which will require brute force.

    Steve.

    June 28, 2013 at 9:31 pm #396992
    aqualectric
    Participant

    Re: ISE 1606 paddle removal.

    Thanks for the replies; this is a hard water area so the crud is probably locking the paddle tabs. I’ll put some more force on it then.

    Cheers,

    Steve.

    July 1, 2013 at 7:48 pm #396993
    aqualectric
    Participant

    Re: ISE 1606 paddle removal.

    Tried to remove some paddles on a different machine today…..no success. More Weetabix possibly???

    Any hints?

    Steve.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.