W5320x0gb neff

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › W5320x0gb neff

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 5, 2013 at 3:29 pm #76112
    simonb
    Participant

    Hi all, neff washing machine customer says intermittent spin with good load inside pump motor all ok insulation test is 23meg? I’m lost except of heater? It’s filling washing and spinning ok when I arrived. Thanks

    July 5, 2013 at 6:18 pm #397289
    Martin
    Participant

    Re: W5320x0gb neff

    23meg is a rubbish result so check closely that heater AND the motor.

    July 5, 2013 at 8:33 pm #397290
    simonb
    Participant

    Re: W5320x0gb neff

    Ok thanks Martin yes will try heater first, thanks

    July 5, 2013 at 9:13 pm #397291
    timdowning
    Participant

    Re: W5320x0gb neff

    I wouldn’t waste your time on the heater. (Out of interest what part was 23M?) I would be looking at the pressure vessel, 5p in the drain hose or possibly the customer.

    July 7, 2013 at 11:36 am #397292
    simonb
    Participant

    Re: W5320x0gb neff

    thanks for that, you might be right about the last one as the customer came across as the confused sort, you know when you ask closed questions and you get a higgledy piggledy reply, the machine’s working fine, i thought about the pressure vessel but as it fills to spot on level(although i now that can be deceiving), id normally check that sort of stuff but integrated and jammed in solid, thanks again.

    July 7, 2013 at 8:48 pm #397293
    nomadPaul
    Participant

    Re: W5320x0gb neff

    I’d say 3 possible causes.
    Slow drain , failing brushes or possibly just an unbalanced load –
    one large item or not a big enough variety of items in load.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.