Miele drier intermittent heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele drier intermittent heat

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 6, 2013 at 10:20 am #76115
    bzz67
    Participant

    model T294C
    Customer complaining that this machine works ok half of the time and the other half, no heat (or possibly ending program early).
    Not really seen many of these machines so any advice on what to look for would be good. ihave looked for poor connections and dry joints but nothing obvious found.

    Thanks Barry

    July 6, 2013 at 12:05 pm #397310
    electrofix
    Moderator

    Re: Miele drier intermittent heat

    most miele td have a seperate relay board and these fail or go intermittant

    relays are cheap enough if you want to solder them to the board

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.