Dishwasher IQ100 control panel

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Dishwasher IQ100 control panel

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 9, 2013 at 2:33 pm #76138
    Jimgal
    Participant

    I have a IQ100 dishwasher that will not start. The control panel has the water tap and rinse aid lights flashing. I have checked the water supply and hose and filled the rinse aid reservoir. It will not reset and there is no error code illuminated. There is also a ‘ticking’ from the base front right hand side. I have also disconnected and reconnected the power supply. Can anyone help?

    Thanks,
    Jim

    July 9, 2013 at 4:11 pm #397368
    Martin
    Participant

    Re: Dishwasher IQ100 control panel

    Sounds like it may be a Siemens, in which case what is the full Enr. (Model) number?

    July 10, 2013 at 3:20 pm #397369
    Jimgal
    Participant

    Re: Dishwasher IQ100 control panel

    Sorry I forgot to mention it was a Siemens. E.nr SN25M231GB/01

    July 16, 2013 at 7:58 pm #397370
    Jimgal
    Participant

    Re: Dishwasher IQ100 control panel

    Can anyone help with this problem?

    July 17, 2013 at 7:10 am #397371
    Martin
    Participant

    Re: Dishwasher IQ100 control panel

    Have you ventured inside the machine and checked the base is not flooded, the drain pump, inlet matrix etc? Can I suggest you contact a local independent (see engineer search facility) if you need a more informed solution.

    July 17, 2013 at 9:17 pm #397372
    Jimgal
    Participant

    Re: Dishwasher IQ100 control panel

    I will check that out. The machine is in France and I will be there next week. I was just looking to avoid having an expensive call out with possible language difficulties. Hoping that it would be a simple fix. Thanks anyway, Jim

    July 18, 2013 at 7:39 am #397373
    Martin
    Participant

    Re: Dishwasher IQ100 control panel

    Jimgal wrote:The machine is in France and I will be there next week.

    “Oh mange tout Rodney…!” Well take your toolbox and delve inside, see what you reckon and let is know. Meanwhile I’ll brush up on my French! 😀

    September 17, 2013 at 6:10 am #397374
    Jimgal
    Participant

    Re: Dishwasher IQ100 control panel

    Looked inside and checked the pump which moves freely. No sign of blockages or flooding. White plastic electrical type box bottom right had side has ticking noise coming from it in time with flashing lights on control panel. Thinking the on / off switch is not working as the machine has to be unplugged to stop this. Any more clues? Jim

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.