Bosch Logixx WAS28466GB/05

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch Logixx WAS28466GB/05

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 15, 2013 at 3:48 pm #76211
    pegasusk7
    Participant

    Bosch Logixx 8 WAS28466GB/05 – Seemingly straightforward carbons job but machine continues to pump out with start button flashing as before on all programmes. I’m guessing m/c needs resetting, had similar with other BSH models, but how?!

    Phil

    July 15, 2013 at 4:23 pm #397677
    Martin
    Participant

    Re: Bosch Logixx WAS28466GB/05

    Unplug the motor block, turn it on then off. Reconnect the motor then try it, hopefully (fingers are crossed) it will be a runner….?

    July 15, 2013 at 7:12 pm #397678
    nomadPaul
    Participant

    Re: Bosch Logixx WAS28466GB/05

    Not had worn brushes cause that fault. check the analogue pressure sensor. Had one the other day where the appliance thought it was at its overfill level so just continually pumped out . Disconnected the hose to the switch , still pumped – disconnected the switch electrically , stopped pumping. New switch cured the problem.

    July 16, 2013 at 11:18 am #397679
    pegasusk7
    Participant

    Re: Bosch Logixx WAS28466GB/05

    Turned out to be simply a question of resetting the machine.
    Turn control knob to spin position, press and hold spin speed rpm selector button, rotate control knob 1 click anticlockwise to drain position, machine acknowledges and turn off. Jobs a good’un!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.