I stopped the cycle

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › I stopped the cycle

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 19, 2013 at 8:17 am #76281
    j.sim101
    Participant

    I have a Zanussi ZWF 16581 W

    I started the cycle, then realised I’d missed some items so stopped it.

    I used the 2 buttons to unlock then open the door.

    I tried to re-start but needed to change the wash temperature to 40 from 60 but the temp would not change.

    I tried rotating the dial to re-set the programme.

    Now the door lock symbol is showing to say the door is not locked (when it is closed), the programme will not change, and the machine wont start.

    HELP PLEASE :boops:

    July 19, 2013 at 10:58 am #397903
    Martin
    Participant

    Re: I stopped the cycle

    Probably got some water in the machine by now so try draining it out ( with the power unplugged) via the emergency drain. Then plug it in and try it again. Making sure first what cycle you want, what temperature, what spin speed and so forth before pressing that ‘Start’ button.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.