Hotpoint WT741 – test

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WT741 – test

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 31, 2013 at 7:50 am #76458
    geoff1
    Participant

    Hi

    when switching on machine the display shows F03 then the word test appears followed by 60c. the display then cycles through these 3 while pumping out and filling

    Tried holding start and on/off to get out of test mode and there are no earth faults. NTC and wiring are ok.

    Module?

    Not had this fault before

    Geoff

    July 31, 2013 at 9:18 pm #398408
    electrofix
    Moderator

    Re: Hotpoint WT741 – test

    have you tried all 3 methods

    trade-technical/hotpoint-stuck-test-t12044.html

    Dave

    August 1, 2013 at 6:45 am #398409
    geoff1
    Participant

    Re: Hotpoint WT741 – test

    Hi Dave

    Many thanks – will go back and try all versions before fitting module.
    Interested in information on high voltage as we do suffer from transformers giving out wrong voltage.

    Geoff

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.