Bosh Dishwasher sgv53egb/10

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosh Dishwasher sgv53egb/10

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 31, 2013 at 5:08 pm #76467
    jamieparrie
    Participant

    I Have a problem has anyone ever come across a dishwasher (Bosh) filling then draining it just keeps filling and draining iv had everything off it still cant find issue any help would be appreciated

    July 31, 2013 at 6:47 pm #398432
    electrofix
    Moderator

    Re: Bosh Dishwasher sgv53egb/10

    have you tried changing the impeller jug its common prob on these

    part no 424099

    Dave

    July 31, 2013 at 10:20 pm #398433
    jamieparrie
    Participant

    Re: Bosh Dishwasher sgv53egb/10

    Hi Dave I have ordered one to try did seem free inside but perhaps resistance is reading wrong.

    Thanks for your reply

    Jamie

    July 31, 2013 at 11:01 pm #398434
    electrofix
    Moderator

    Re: Bosh Dishwasher sgv53egb/10

    they have to reliably open and close to count the water in

    if it only fires every other one you get twice the water

    you can buy and solder in the reed switches to repair them

    Dave

    August 1, 2013 at 8:23 pm #398435
    jamieparrie
    Participant

    Re: Bosh Dishwasher sgv53egb/10

    Great information thanks ill have to look for a reed switch to solder in next time as iv already ordered the part

    Where can you buy the reed switch, Connect or quailtex ill have a look later

    Thanks Again

    Jamie

    August 1, 2013 at 9:28 pm #398436
    nomadPaul
    Participant

    Re: Bosh Dishwasher sgv53egb/10

    Tbh , the main failure with the impeller jug is the magnet falling of the blade of the impeller itself .

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.