bush w/m a126q

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #76543
    hilly
    Participant

    this bush a126q w/m wont start any cycle the start/pause light comes on then after about 30 seconds it starts to flash, it doesnt lock the door or anything, ive changed the interlock but no joy and checked everything else. the replacement interlock was a 2nd hand one I had in my van so im thinking about ordering one in just incase that was a duff one.

    any thoughts pls
    paul

    #398731
    BobHope
    Participant

    Re: bush w/m a126q

    check the motor plug wiring.

    Bob.

    #398732
    hilly
    Participant

    Re: bush w/m a126q

    I’ll double check it, cheers bob

    #398733
    sce
    Participant

    Re: bush w/m a126q

    very latest models under this same model number do not have a back chassis cover to remove so you cannot get at the belt or the motor bolts easily without either laying the whole machine on its side, motors on SOME model versions are Selini motors-very cheap ones as you`d expect and it is almost impossible to get at the screws to replace motor brushes without removing the front panel- it`s easy enough to do though.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.