- This topic has 3 replies, 2 voices, and was last updated 12 years, 8 months ago by
.
-
Posts
-
Bit of a long shot, I have a Bosch Exxcel WF02465GB/01 in for repair. It’s a reconditioned machine I supplied about a year back and the PCB has gone down (Previous post). I only cover reconditioned machines with a 6 month guarantee so but I would still like to help my customer out as a good will gesture by repairing it, however I don’t have a PCB and they are very expensive to purchase new. I do however have a couple of Spanish Bosch machines locked away in my garage which all have tub issues. Was thinking about making one out of 2? Anybody know if this is a non starter?
Thanks,
Rob.Re: Bosch tub change
dont know whether tub change is possible you would have to look at hose positions etc
from previous post did you check the heater and motor
Dave
Re: Bosch tub change
As it’s in the workshop and away from public reach, I have run the machine with all the heater wires disconnected and the earth connection removed from the motor. It makes no difference to the fault so im assuming the fault remains with the PCB. There is some earth leakage through the armature on the motor, The environment where the machine stood is the likely cause as it’s located in an out building which has had an ongoing leak causing a damp environment. I’m sure this will put the guarantee concerns to rest however I still feel that I would like to support my customer by managing some kind of repair even if it’s a case of making a machine up somehow (in a safe way of course)..
- You must be logged in to reply to this topic.