Beko Leisure HJA6100 Fridge Freezer

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Beko Leisure HJA6100 Fridge Freezer

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 10, 2013 at 11:50 am #76610
    oxo1961
    Participant

    Leisure HJA6100 Fridge Freezer?
    We have a Leisure HJA6100 Fridge Freezer and have a noise at the back of the freezer compartment which is either the fan or the condenser, attempting to take the panel of came up against a problem,, the Icemaker came out easily enough but the back panel seams to have a way to take out!!! We have undone the screw to the top panel and the one at the bottom where the vent is but the panel doesn’t want to come out. For fear of breaking it we are asking the question is there a sequence of taking the 2 Panels out??? Can you help 😯 😯 😯

    Graham

    August 10, 2013 at 1:18 pm #398913
    Simon46
    Participant

    Re: Beko Leisure HJA6100 Fridge Freezer

    You may need to unplug fridge freezer and do a 12 hr door open defrost. Rear panel may have frozen to evaporator.

    .

    August 10, 2013 at 2:59 pm #398914
    stevebunyan
    Participant

    Re: Beko Leisure HJA6100 Fridge Freezer

    Poss defrost element or timer if this model has one.

    September 8, 2013 at 3:00 pm #398915
    oxo1961
    Participant

    Re: Beko Leisure HJA6100 Fridge Freezer

    Heres one for you now.. The Freezer side has gone like a fridge not freezing but still cold, and the Fridge bottom 3 sheves are freezing any help Please

    September 8, 2013 at 6:33 pm #398916
    SAMURI
    Participant

    Re: Beko Leisure HJA6100 Fridge Freezer

    The fan has stopped working in the freezer.

    It is iced up or the fan is faulty.

    The panels are held on with the Screws and you just have to pull them off carefully as they clip in on both sides.

    The fans on this model are cheap and the Beko American is more reliable than most.

    Bob

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.