- This topic has 1 reply, 2 voices, and was last updated 12 years, 8 months ago by
.
-
Posts
-
A friend asked me to have a look at his washing machine. The belt broke and ripped off some wires. There are 4 wires disconnected, all from the same device which has four ΒΌ” blade connections on it. It’s located in the rear of the static drum, adjacent to the heater. I would guess it’s the thermostat/temp sensor.
When I measure resistance across the device, 1 pair is closed circuit (safety cutout?) and the other pair is several hundred ohms (temp sensor?). Of the 4 wires that are missing, 2 are coloured grey and the other 2 are coloured white. Any ideas what goes where?
I’ve tried googling a maintenance manual for it (Servis M3905W) but with no luck. Any help or advice you could give me would be appreciated.
Re: Servis M3905W
Unless some soul happens to have an old wiring diagram you may struggle…
http://www.ukwhitegoods.co.uk/help/abou … ances.html
Even before they collapsed information was becoming scarce.
K.
- You must be logged in to reply to this topic.