Miele W489I washer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele W489I washer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 12, 2013 at 8:48 am #76631
    Muv
    Participant

    Hi all

    Been given this miele machine as a part ex, the machine will sometimes complete a wash, then after opening the door and trying to start another wash its completely dead.
    This sometimes happens near the end of a wash also, if the machine is then left for around 20 minutes it will power up again.

    The board was removed by a miele engineer before it was given to me, after board was re installed this is now the scenario…

    Any ideas


    Martin

    August 12, 2013 at 10:40 pm #399315
    admin
    Keymaster

    Re: Miele W489I washer

    take a look at the on off switch, I have had 2 of these go ify
    push it in and out/tap it and see if it comes back on?

    canufixit

    August 13, 2013 at 12:13 am #399316
    Muv
    Participant

    Re: Miele W489I washer

    Thanks,will give that a try and let u know

    Martin

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.