- This topic has 3 replies, 2 voices, and was last updated 12 years, 7 months ago by
.
-
Posts
-
Was called to an Indesit WIL 133 Washer
found lights 3&4 flash + mains found it fills and drains at the same time is it pressure sw or control board any help
Thanks EltelRe: Indesit WIL 133 Washer
if you cancel the programme does the pump still run till the door unlocks ?
am thinking poss the triac that controls the pump is short circuit on the board
Dave
Re: Indesit WIL 133 Washer
Control buttons dont operate at all
thats why i wondered if it was the pressure sw or control boardRe: Indesit WIL 133 Washer
i would check the pump triac anyway also if house has no rcd have you checked for earth faults ? as most of the components neutral switch. trace pump wire to board and see if your multimeter gives you a reading across it
have you disconnected pump ( not sure if units senses it or not) and see if it will fill ?
this is one of those trial and error faults.
Dave
- You must be logged in to reply to this topic.