Indesit Wahing machine WIXE127 uk(tev)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit Wahing machine WIXE127 uk(tev)

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 15, 2013 at 6:28 pm #76696
    asp11
    Participant

    This appliance has all the lights flashing on the display when its turned on and will start a selected programme and finish it without any problems. So I natually thought it was the display pcb at fault….. Fitted it but now it’s still doing the same thing as before??? (the box wasn’t properly sealed from the supplier mind)

    Might there be another fault causing this problem? Any help would be great as I don’t want to waste more time :con:


    Thanks
    Brett

    August 15, 2013 at 6:59 pm #399459
    johnnyj
    Participant

    Re: Indesit Wahing machine WIXE127 uk(tev)

    Is it all the lights or just one or two, if its all the lights have a look in the simple pcb repair tips that might help you

    August 15, 2013 at 9:15 pm #399460
    asp11
    Participant

    Re: Indesit Wahing machine WIXE127 uk(tev)

    It is all the lights including the display figures themselves!! The “simple pcb repairs” section was interesting – thanks.
    Not sure if soldering a small cap into a pcb will work with me but if it will solve the problem then good, thing is it’s working atm so if I make a mistake then she won’t be happy!!

    August 15, 2013 at 10:18 pm #399461
    madangler1
    Participant

    Re: Indesit Wahing machine WIXE127 uk(tev)

    Iv seen the main module cause this.

    August 15, 2013 at 10:27 pm #399462
    iadom
    Moderator

    Re: Indesit Wahing machine WIXE127 uk(tev)

    Done that capacitor change on the main PCB many times with a 95{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} success rate, just make sure you get the capacitor polarity the right way round.


    Sent from my iPad using Tapatalk HD

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.