Hoover HNMF 2605A L Fridge / Freezer.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover HNMF 2605A L Fridge / Freezer.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 2, 2013 at 6:00 pm #76947
    Specialist01269
    Participant

    Hi Guys: Looking for some pointers on how to replace the Fridge Sensor on this fridge freezer.
    I don’t normally touch refrigeration but this is for an old lady who’s a neighbour so I got lumbered by my missus.

    Andy

    September 4, 2013 at 2:59 pm #400235
    Specialist01269
    Participant

    Re: Hoover HNMF 2605A L Fridge / Freezer.

    Anybody by any chance got any service info for it ? going to look at it on Friday.


    Andy

    September 4, 2013 at 6:08 pm #400236
    SAMURI
    Participant

    Re: Hoover HNMF 2605A L Fridge / Freezer.

    What is the fault on this one is the fridge freezing or not cold.

    Bob

    September 4, 2013 at 6:25 pm #400237
    Specialist01269
    Participant

    Re: Hoover HNMF 2605A L Fridge / Freezer.

    Hi Bob: Thanks for the reply, the Fridge is starting to Freeze up at the back.
    Been told these sensors are a bit of a Pig to replace :eeek:

    Andy

    September 4, 2013 at 7:06 pm #400238
    SAMURI
    Participant

    Re: Hoover HNMF 2605A L Fridge / Freezer.

    I think the sensor may be foamed in on this Model.
    If you turn the control Knob to off and the fridge continues to run it will be a module fault.
    If it turns off then it is the sensor faulty.

    The module may be obsolete now but you can get an alternative but you have to break off a part of he PCB depending what version it is.

    The module normally comes with instructions.

    If the module has a foamed in sensor then I would say it is ber.

    Hope this helps

    Bob

    September 5, 2013 at 8:03 am #400239
    Specialist01269
    Participant

    Re: Hoover HNMF 2605A L Fridge / Freezer.

    Hi Bob: Thanks again for the reply, if you turn the control off then the fridge stops so a sensor fault as you said. The modules are apparently still available from HSCL, will go see the old lady & see what she wants to do.


    Andy

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.