whirlpool awor4205 washer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool awor4205 washer

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • September 13, 2013 at 11:18 am #77117
    scoobya1
    Participant

    Hi we have customers machine in are workshop machine is completetly dead. there is power too the board so we assumed it was a fault with the board. having tried new board still dead possible a faulty new board so got another one from connect but still the same problem! everything as been tested with megga motor etc so any help would be great thanks.

    September 13, 2013 at 11:45 am #401084
    Allsorts
    Participant

    Re: whirlpool awor4205 washer

    So the motor has been tested with a megger?

    and the door switch, how have you tested that?

    September 13, 2013 at 1:34 pm #401085
    scoobya1
    Participant

    Re: whirlpool awor4205 washer

    DOOR SWITCH IS ALL OK AND MOTOR HAS BEEN TESTED WITH A MEGGER.

    September 13, 2013 at 2:04 pm #401086
    Muv
    Participant

    Re: whirlpool awor4205 washer

    Maybe a faulty mains supressor, have had a few machines where i have had full voltage coming in, but still machine was dead, new supressor and it was ok!

    Worth checking

    Martin

    September 13, 2013 at 2:29 pm #401087
    scoobya1
    Participant

    Re: whirlpool awor4205 washer

    thanks martin I will speak too our engineer thanks again.

    September 14, 2013 at 7:00 am #401088
    Grendal
    Participant

    Re: whirlpool awor4205 washer

    Common fault on these is the door lock going faulty causes the machine to go dead

    September 14, 2013 at 11:06 am #401089
    scoobya1
    Participant

    Re: whirlpool awor4205 washer

    door lock is all ok plus everything else tests ok mains suppressor etc. when we put 240volt straight too the terminals on the transformer on the board we should at least get the lights too come on but nothing?

    September 14, 2013 at 3:31 pm #401090
    Martin
    Participant

    Re: whirlpool awor4205 washer

    ….but have you changed the door switch?

    September 17, 2013 at 8:28 am #401091
    scoobya1
    Participant

    Re: whirlpool awor4205 washer

    no but will try door lock thanks again.

    July 14, 2014 at 4:12 pm #401092
    keithwilliams
    Participant

    Re: whirlpool awor4205 washer

    so scooby, if you can remember, what was it cos ive got same symptoms customer brought me the board which has a couple of suspect resisitors on it. im curious to know how you got on with it.

    July 14, 2014 at 6:51 pm #401093
    keithwilliams
    Participant

    Re: whirlpool awor4205 washer

    found this board listed in “simple pcb repairs” the two components i spotted are mentioned plus one other. so parts ordered.

    July 15, 2014 at 8:16 pm #401094
    Micky 32
    Participant

    Re: whirlpool awor4205 washer

    Come across this problem before a few times, everytime a resistor burnt out on the board but unfortunately everytime blows again straight away once replaced. Something else on the board must cause it.

    July 15, 2014 at 8:50 pm #401095
    Hollytree_Technical
    Participant

    Re: whirlpool awor4205 washer

    Micky – I suggest that you look in the PCB repair thread where you will find my cure to this problem.

    jem

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.