- This topic has 1 reply, 1 voice, and was last updated 12 years, 7 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Indesit IWDC 6125 starts to fill for a few seconds then the 5 lights across the top start to flash quickly the pump then starts to empty machine and carries on running even when empty, the only other light on is the door locked light which stays on constantly. Dries works ok and on a spin cycle it runs for a few minutes before the same light sequence and pump starts.
Any help appreciated.
Thanks DaveRe: indesit iwdc6125 flashing lights
Update for this fault as it might help someone else, turned out to be the main PCB in the back of the machine. Removed the old one and it rattled when shook, took the lid off and it had blown something clean off the board! 😮
Tried PCB from another machine with different fault and works fine now.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.