Beko WMB61431 door seal impossible to fit?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMB61431 door seal impossible to fit?

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 25, 2013 at 7:05 pm #77332
    Washdisher
    Participant

    Hi,

    Quite quickly realised this wasn’t going to go on without removing the front – which is what I did, but I still couldn’t get anywhere.

    Unlike every door seal I’ve ever seen, this one does not have any means of gripping onto the tub. It just slides off before it’s even half way seated.

    If anyone has managed to fit one of these I’d be very grateful for any tips.

    September 25, 2013 at 7:38 pm #401783
    Andy jones
    Participant

    Re: Beko WMB61431 door seal impossible to fit?

    Not using washing up liquid are you


    Sent from my iPad using Tapatalk HD

    September 25, 2013 at 7:51 pm #401784
    Washdisher
    Participant

    Re: Beko WMB61431 door seal impossible to fit?

    Hi Andy,

    Tried dilute washing up liquid as I usually do. Came to the conclusion this is what was causing the seal to slip off so tried drying it off but still didn’t work. Are you suggesting not using washing up liquid?

    September 25, 2013 at 7:54 pm #401785
    Andy jones
    Participant

    Re: Beko WMB61431 door seal impossible to fit?

    Yes mate had exactly the same problem. Make the seal too slippery


    Sent from my iPad using Tapatalk HD

    September 26, 2013 at 8:29 pm #401786
    Washdisher
    Participant

    Re: Beko WMB61431 door seal impossible to fit?

    Turns out I was doing it all wrong and was much easier when I went back to it fresh.

    Thanks for your help Andy.

    September 26, 2013 at 9:00 pm #401787
    Andy jones
    Participant

    Re: Beko WMB61431 door seal impossible to fit?

    No problem


    Sent from my iPad using Tapatalk HD

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.