Maytag MAV9750AGW Top Loader NoSpin

This topic has 5 replies, 3 voices, and was last updated 12 years, 6 months ago by bobnorris.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
October 4, 2013 at 1:14 pm #77453

bobnorris
Participant

I’m not familiar with this make and need advise on where to start.All functions are working except spin, but the motor is running during spin.What is the possible cause and is it likely to be financially viable? The machine is 8 years old. Any help much appreciated.
Bob

October 4, 2013 at 1:24 pm #402242

admin
Keymaster

Re: Maytag MAV9750AGW Top Loader NoSpin

Hi

There is a nylon / plastic drive between the motor and gearbox.Is it broken ?

Bryan

October 4, 2013 at 3:17 pm #402243

bobnorris
Participant

Re: Maytag MAV9750AGW Top Loader NoSpin

I havent stripped anything to find out.I’m looking on http://www.partadvantage.com at a transmission diagram.Do you know what part reference to look for? Bear in mind the wash agitation is normal.

October 4, 2013 at 10:48 pm #402244

jag-12
Participant

Re: Maytag MAV9750AGW Top Loader NoSpin

Check the pulley/cam assembly (pt 3 & 4).
The motor reverses to go into spin and the cam rides up the shaft and releases the brake letting the drum spin.
If the brake is not released the motor runs and slips the belt.
If you turn the pulley by hand you should feel it release the brake and start to turn the drum

October 5, 2013 at 11:03 am #402245

bobnorris
Participant

Re: Maytag MAV9750AGW Top Loader NoSpin

Thanks jag-12. I’ll call out next week and see if that’s the problem.The question is what cost to fix it?

October 5, 2013 at 2:03 pm #402246

jag-12
Participant

Re: Maytag MAV9750AGW Top Loader NoSpin

Parts in stock with connect.
Straight forward to fit
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.