- This topic has 3 replies, 2 voices, and was last updated 12 years, 6 months ago by
.
-
Posts
-
hi all and thanks for looking,my brother has one of these and the fridge part wasnt cooling,upon inspection i noticed it had ice behind the cover inside,i defrosted it and took the panel off i tested i believe are called the thermal trips like on this vid http://www.youtube.com/watch?v=XQnwYmEGEGI and it came up with a reading of 356 which according to the video sounds about right,,,,,apart from the ice problem it keeps tripping the electric,whil i was testing i unplugged all from the panel,then proceeded to plug stuff in one by one turning of fridge beforehand,as soon as i re attached the thermal trip plug the fridge comes on as normal then trips the electric and goes off,any ideas as the multimeter reading was ok but it turns off fridge when i plug it back in,,,
thankyouRe: samsung rsh1dtmh1/xeu problem
Hi
Without confirming that all the parts have been tested correctly then it cannot be certain..BUT if it is tripping the electric’s then STOP as it can cause a more serious problem like demolishing your kitchen.
We have a repair kit that will cure the majority of the faults on the RSH1 defrost side and evaperator cover side. Without having all the components tested we cannot confirm that the fault is in these components.
Re: samsung rsh1dtmh1/xeu problem
thanks for the info bryan,forgot to say aswell i put back together without plugging the thermal trip back in ~(if thats what its called,it has been on for a good while now and the fridge part is cold,freezer part is normal,my understanding is it may start to freeze up again
Re: samsung rsh1dtmh1/xeu problem
,forgot to say aswell i put back together without plugging the thermal trip back in ~(if thats what its called,it has been on for a good while now and the fridge part is cold,freezer part is normal,my understanding is it may start to freeze up again
Hi
In that case the repair kit should cure your problem as it contains all the latest modified parts. E-mail me for details
Bryan
- You must be logged in to reply to this topic.