BEKO CFD64B

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO CFD64B

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 11, 2013 at 7:27 am #77561
    ELDAR59
    Participant

    any beko guys out there?
    we have a CFD64B that is over freezing in the fridge. we’ve changed the small potentiometer pcb in the top of the fridge and the main one at the back, but it’s still over freezing.
    where does the pcb get the info from? I cant see a sensor cable.

    cheers.

    October 11, 2013 at 9:17 pm #402604
    Seamy
    Participant

    Re: BEKO CFD64B

    Presumably theres an NTC mounted in the fridge cavity/wall that senses the temperature in fridge, not definite about this though. Theres 2 NTCs listed, ones the defrost one in the freezer department.
    On the rear control board, the 4way cable on the right hand side of PCB- blue = neut, brown = line, yellow = defrost, black = comp’ on the left of PCB, there a 3 pairs of cables, from top down they are potentiometer control, defrost sensor, evaporator sensor.

    I’m presuming the evaporator one is foamed into the rear wall of the fridge & is not replaceable. Most of these electronically controlled ones will defualt to timed cooling if theres a problem with the control NTCs.

    October 11, 2013 at 10:01 pm #402605
    ELDAR59
    Participant

    Re: BEKO CFD64B

    Thanks mate. Looks like its a no go then.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.