Zanussi ZWF14070W1 been transported now error code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWF14070W1 been transported now error code

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 11, 2013 at 3:46 pm #77578
    allan73
    Participant

    Hi all,
    The above machine has been moved without transit bolts and now is displaying an error in diagnostics. Unfortunately I can’t remember which way to read the codes but 3 red flashes and 1 green are being shown.
    I thought I’d resolved the problem by removing the pressure hose and refitting, but the problem has recurred.
    Any advise would be grateful.
    Allan

    October 11, 2013 at 4:03 pm #402657
    Martin
    Participant

    Re: Zanussi ZWF14070W1 been transported now error code

    As you know the error relates to the Analogue Pressure S/W associated fault. Could be the beast was shipped on its side or some such transit problems, so changing the switch may be your best option, maybe?

    October 11, 2013 at 5:43 pm #402658
    allan73
    Participant

    Re: Zanussi ZWF14070W1 been transported now error code

    Thanks Martin, I did think the problem lay with the pressure system. As you say I suspect the machine has been lied flat.
    I was hoping there could be a reset procedure as with the Indesit made stuff with the similar pressure switch, but maybe changing the switch is the answer now.
    Allan

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.