3rlsq8033sw2 whirlpool

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › 3rlsq8033sw2 whirlpool

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 22, 2013 at 2:45 pm #77738
    DRH
    Participant

    The motor runs when off the washer, but very slow. When on the washer it just buzzes and no drive. Fitted new cap,still the same. Fitted a new motor, still the same. help !!!! please !!

    October 22, 2013 at 2:51 pm #403242
    admin
    Keymaster

    Re: 3rlsq8033sw2 whirlpool

    Seized gearbox ?

    Bryan

    October 22, 2013 at 3:06 pm #403243
    DRH
    Participant

    Re: 3rlsq8033sw2 whirlpool

    gearbox is free, you can turn it by hand.The motor runs slow taken off the gearbox.

    October 24, 2013 at 4:41 pm #403244
    spanner51
    Participant

    Re: 3rlsq8033sw2 whirlpool

    The reversing switches are inside the timer, if one is faulty it could cause the symptons you describe. If the gearbox is OK, and you have tried a new motor, there isn’t much else in these machines.

    Graham

    October 25, 2013 at 12:33 pm #403245
    DRH
    Participant

    Re: 3rlsq8033sw2 whirlpool

    thanks Graham.any idea about the small electronic up in the facia ?. has that anything to do with drive.

    October 25, 2013 at 5:24 pm #403246
    spanner51
    Participant

    Re: 3rlsq8033sw2 whirlpool

    The pcb in the facia is a Temperature Control Board. I think it is only used while filling for a warm wash. It will alternate the water valves to give a warm wash.

    Graham

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.