Hoover Tumble Dryer VHC180-80 Not Drying

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover Tumble Dryer VHC180-80 Not Drying

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 24, 2013 at 12:35 pm #77777
    Bernie
    Participant

    Hoover Tumble Dryer VHC180-80 Not Drying
    Have tested heater that’s ok and the wires from the programmer to the heater the 3 brown & the 2 white ones, they are all fine, the heater does get a little warm to the touch when the machine is run with the back off.
    Do the 2 white wires to the heater go to a stat I could not see, if so could it be this that is causing the problem and is it a common fault?
    If not any suggestions please
    Thanks
    Bernie

    October 24, 2013 at 12:43 pm #403356
    jamieparrie
    Participant

    Re: Hoover Tumble Dryer VHC180-80 Not Drying

    hello.check front stat that is in the front door / drum housin.usualy those that go.

    October 24, 2013 at 1:29 pm #403357
    Bernie
    Participant

    Re: Hoover Tumble Dryer VHC180-80 Not Drying

    Thanks for the very quick reply

    I have just looked on Connections website and there is a pdf for that modle but they do not list a part number for it, would you know it?

    Thanks again
    Bernie

    October 24, 2013 at 5:17 pm #403358
    Martin
    Participant

    Re: Hoover Tumble Dryer VHC180-80 Not Drying

    40001954

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.