Miele g1182scvi dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele g1182scvi dishwasher

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 11, 2013 at 5:51 pm #78050
    DPDOM
    Participant

    Hi Guys

    Can anyone give any info on how to read the fault codes on this dishwasher. It will start and run for a few seconds but then the alarm sounds and all 6 program lights flash. The only way I have found to reset it is by holding the program button and turning on then press the program button 3 times and turning off.
    The problem started intermittently but now it happens all the time.

    Thanks in advance

    David

    Sent from my iPad using Tapatalk HD

    November 11, 2013 at 6:03 pm #404307
    Seamy
    Participant

    Re: Miele g1182scvi dishwasher

    Does it fill with water or not, or does it start wash motor & then go off, they have a high level pressure switch mounted on circulation pump which will knock off the programme if its not energised when circulation pump is running, this could be that not enough water has filled in or that theres a blockage in the circulation pump impellor. Another known error of them going off early is faulty heater relay.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.