Siemens Touch Hob ET76S502E/01 not induction

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens Touch Hob ET76S502E/01 not induction

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 12, 2013 at 4:29 pm #78070
    Johnnyboy
    Participant

    This gentlemen is a beaut… right hand side rings dont work, ohmic values the same as the left rings so has to be PCB? £190 later, reinstall hob switch on and …nothing. 🙁 turns upside down to see if volts are going to it, and they are glowing hot ????? turn it back the right way and it works for a wee while untill I tried the Duel circuit then nothing… this one has me stumped , it only works upside down for the right hand side. Magnetic pans anybody.

    November 13, 2013 at 6:14 pm #404354
    franz
    Participant

    Re: Siemens Touch Hob ET76S502E/01 not induction

    Have you checked that the links in the terminal block are tight, sounds like a loose connection. Try tightening the screws even if they look o.k.
    Franz

    November 14, 2013 at 8:16 pm #404355
    Johnnyboy
    Participant

    Re: Siemens Touch Hob ET76S502E/01 not induction

    There was a wiring kit supplied as a modification, but worth a shout cheers.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.