AEG 59800 Tumble Dryer (Heat Pump Type) – Not drying

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG 59800 Tumble Dryer (Heat Pump Type) – Not drying

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 19, 2013 at 7:39 am #78185
    SteveATY
    Participant

    Hi Chaps,

    As normal, any advice would be handy on this one.

    Basically, when you set it going on a cycle it starts as normal. After a few minutes the compressor starts but the clothes do not get hot and as a result no water is evaporated and pumped into the draw.

    Is there a heater reset on these?

    No alarms / lights are showing so all is normal with the panel.

    Pretty rare machine thank God as they weigh an absolute ton!


    Cheers,
    Steve.

    November 19, 2013 at 8:46 am #404747
    Criscold
    Participant

    Re: AEG 59800 Tumble Dryer (Heat Pump Type) – Not drying

    Poss circulation fan ? let me have your email and I can send you the manual for this

    Colin

    November 19, 2013 at 8:53 am #404748
    SteveATY
    Participant

    Re: AEG 59800 Tumble Dryer (Heat Pump Type) – Not drying

    Thanks Colin.

    The circulation fan is running. The one that is mounted in the rear cowling.

    s4stevie@hotmail.com


    Thanks again.

    November 19, 2013 at 9:20 am #404749
    Criscold
    Participant

    Re: AEG 59800 Tumble Dryer (Heat Pump Type) – Not drying

    You Have mail

    November 19, 2013 at 12:22 pm #404750
    SteveATY
    Participant

    Re: AEG 59800 Tumble Dryer (Heat Pump Type) – Not drying

    Thanks Colin.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.