zanussi zwf 1231w pcb

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › zanussi zwf 1231w pcb

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 20, 2013 at 12:05 pm #78218
    spencer123
    Participant

    Hi when replacing a pcb which is second hand to this model is it straight forward,DO you just take old out and replace it does it have to be reprogramed etc thanks in advance, 😀

    November 20, 2013 at 4:47 pm #404861
    Seamy
    Participant

    Re: zanussi zwf 1231w pcb

    If its a programmed one that you’ve got then you just have to fit it.

    November 20, 2013 at 9:12 pm #404862
    spencer123
    Participant

    Re: zanussi zwf 1231w pcb

    HI Seamy how can you tell or find out thanks

    November 21, 2013 at 9:14 am #404863
    Seamy
    Participant

    Re: zanussi zwf 1231w pcb

    From where you bought it, was it second hand from another appliance? Then it would be programmed to work on the product that it came from, if your machine is not the same product code (see 9 digit PNC code + 01/02/03 etc) then theres a chance it won’t work.
    There are unconfigured boards & configured boards available for these available to purchase but they are only configurable by Service Force Engineers with a laptop and the appropiate software (Sidekick).

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.