Stoves range induction fault.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Stoves range induction fault.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 21, 2013 at 12:57 pm #78242
    bzz67
    Participant

    Stoves sterling 1100e 444445387
    Went to this range because the touch control panel for the induction hob was flickering at times, cutting out at times, working fine at times. when flickering a clicking noise can be heard.Not seen one of these before, so after looking for poor connections and dry joints i decided to blame the pcb and ordered a new one, fitted it today and there is still faults, similar but not the same. now i am not sure if i fitted a faulty new pcb or whether there is an underlying problem that i have missed.
    Any help would be great, cant afford to keep guessing with these expensive parts.

    Thanks Barry.

    November 22, 2013 at 6:31 pm #404965
    Seamy
    Participant

    Re: Stoves range induction fault.

    Worthwhile checking the terminal block for loose/poor connections. Have seen many of these with loose links.

    November 25, 2013 at 8:33 am #404966
    bzz67
    Participant

    Re: Stoves range induction fault.

    Yep, that’s what i was hoping, first place i looked.no such luck.

    November 25, 2013 at 8:35 pm #404967
    Seamy
    Participant

    Re: Stoves range induction fault.

    Very little on that one, it doesn’nt have fault codes I think, have access a wiring diagram if its any good to you.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.