Beko 1512 s

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko 1512 s

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • November 22, 2013 at 2:39 pm #78266
    Wykked1
    Participant

    Hi, this machine was working fine yesterday. Went to put a load of washing on today and none of the lights will come on except the Light saying I can open the door. I push the start button and nothing happens, no lights come at all. Anybody got any ideas what could be going on?

    November 22, 2013 at 2:44 pm #405032
    Martin
    Participant

    Re: Beko 1512 s

    What is the FULL model number of this machine for starters?

    November 22, 2013 at 3:22 pm #405033
    Wykked1
    Participant

    Re: Beko 1512 s

    Sorry am a complete numpty when it comes to technical things, the only number I have seen is WMA 1512 s is there somewhere else I should be looking for a model number?

    November 22, 2013 at 4:06 pm #405034
    Martin
    Participant

    Re: Beko 1512 s

    WMA1512S is the full model number we seek, thanks. Little clues come from what you tell us about the fault unfortunately. Other than suggest to check the power supply socket first and if that checks out OK then it’s time to look inside.

    November 22, 2013 at 4:16 pm #405035
    Wykked1
    Participant

    Re: Beko 1512 s

    Usually when I turn on the machine the panel lights up, but only the light saying I can open the door comes on. This would suggest to me that there is power there, but when I push the start button, nothing happens.

    November 22, 2013 at 4:48 pm #405036
    Martin
    Participant

    Re: Beko 1512 s

    That’s exactly what you said earlier and, rather than repeating what I said earlier, refer you back to what I suggested you do next. 😉

    November 22, 2013 at 5:55 pm #405037
    Wykked1
    Participant

    Re: Beko 1512 s

    Which was to look inside and frankly I don’t have a clue where to start, which was why I came here for help.

    November 22, 2013 at 6:15 pm #405038
    Martin
    Participant

    Re: Beko 1512 s

    You will need to check the door lock, the motor and the timer. Those 3 could be the reason why it has failed. To do this it will need unplugging and then the back panel and top panel removed for access. We have to assume you have sufficient electro-mechanical knowledge and with the right tools and test equipment in order to do this.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.