Whirlpool ADG722H Heater clips

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Whirlpool ADG722H Heater clips

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 8, 2005 at 6:07 am #7828
    Simon46
    Participant

    Am replacing heater (tube type) on whirlpool dishwasher. Is there a set of corbin clips available that will fit it. Universal jubilee types i have are a bit wide to fit onto hoses that have the channel in them.

    Regards
    Simon

    February 8, 2005 at 6:20 am #125345
    admin
    Keymaster

    Re: Whirlpool ADG722H Heater clips

    Whirlpool do thin jubilee clamps that do the job very well, expensive though, there are different sizes from inlet hose size to sump hose (dishwasher) size.
    Perhaps one of the whirlpool lads will provide the part numbers for you.

    Kevin

    February 8, 2005 at 5:32 pm #125346
    Simon46
    Participant

    Re: Whirlpool ADG722H Heater clips

    Yes Kevin been to DIY places today but no joy with the thin clips.

    February 8, 2005 at 5:47 pm #125347
    admin
    Keymaster

    Re: Whirlpool ADG722H Heater clips

    hi,


    Try this whirlpool part number….4819 40118174 these will do the job for you.

    Kevin

    February 8, 2005 at 6:05 pm #125348
    Simon46
    Participant

    Re: Whirlpool ADG722H Heater clips

    Ta Kevin. Will order two of those.

    February 11, 2005 at 7:55 pm #125349
    Simon46
    Participant

    Re: Whirlpool ADG722H Heater clips

    Just for feedback on this model one of the 25-45 clips fits on impellor side of heater but the other hose is larger and i struggled to get it on even with washing up liquid. Ran dishwasher through a lot of cycles to clear.
    Marks on old clips say 47 and 50.

    Simon

    February 11, 2005 at 8:20 pm #125350
    admin
    Keymaster

    Re: Whirlpool ADG722H Heater clips

    hi,


    These are all thin jubilee clips and are whirlpool part numbers..

    4822 401 10258 i think inlet hose dia.

    4819 401 18174 read simons comment

    4819 401 18057 possibly the next size up simon

    4812 221 22295 will easily do the sump hose on a whirlpool dishwasher.

    All of these are a stupid whirlpool inflated price but do fit the restriction shoulders on the ends of the hoses…..

    Kevin

    February 11, 2005 at 8:34 pm #125351
    clyde
    Participant

    Re: Whirlpool ADG722H Heater clips

    Whirlpool do a clamp kit 481931039692 not sure on the price tho!

    IIRC Its 2 of each size clip in kevins post

    Clyde

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.